Digital TV

Tuner
M88TS2808
M88TS2100
M88TS2020
 
Demodulator
M88DS3000/2
M88DC2800
M88DT2001
M88DD2000/1
 
Receiver
M88RS2000
language
中文
Home
About Montage
News
Products
Job Center
Contact info
 

M88DC2800 – DVB-C Demodulator

The M88DC2800 is a single-chip QAM demodulator that supports 16, 32, 64, 128 and 256-QAM signals. The device is fully compliant with DVB-C and ITU-T J83 annex A/C specifications. Together with a cable tuner, the M88DC2800 provides a digital front-end solution for compressed television, sound and data services over cable.

The M88DC2800 accepts IF signals from the tuner and outputs MPEG-2 transport streams to the decoder. It performs all necessary demodulation and FEC (Forward Error Correction) functions for recovery of QAM modulated bit streams. The integration of A/D converter, programmable gain amplifier, internal supply regulator and reference generator reduces external components and saves BOM cost.

The M88DC2800 offers strong echo mitigation and symbol timing offset mitigation as well as carrier suppresstion. The device is controlled via a 2-wire bus. The device is operated from a single 3.3 V power supply and the power consumption is only 180 mW at 7.2 MSymbol/s.

 

 

Feature

  Fully compliant with DVB-C and ITU J83 A/C specifications
  16, 32, 64, 128 and 256-QAM supported
  Symbol rates of 0.87 Mbaud to 9 Mbaud
  On-chip 10-bit A/D converter for direct IF applications
  Dual AGC for IF and RF gain control
  Integrated PGA to accommodate 0.7 V to 1.1 V input signals
  Front derotator for better low symbol rate performance and relaxed tuner constraints
  Full digital demodulation with integrated matched filter and adaptive equalizer
  Strong echo mitigation
  Automatic spectrum inversion
  Excellent adjacent-channel and co-channel interference suppresstion
  Excellent symbol timing offset mitigation and carrier suppression
  On-chip FEC decoder with individually bypassable blocks
  Integrated BER and SNR indicators for signal quality monitoring
  Lock and interrupt indication available on pins
  Constellations read out support
  Internal supply regulator and reference generator to reduce BOM cost
  On-chip system clock from external quartz crystal
  Auxiliary clock output for external use
  Parallel and serial interfaces, with DVB common interface support
  Fully configurable MPEG-TS output pins to optimize PCB board layout
  2-wire bus for control and monitoring
  Dedicated 2-wire bus repeater to control tuner
  Digital CMOS technology, 3.3 V power supply
  Low power consumption: 180 mW at 7.2 MSymbol/s
  Green package: 64-pin LQFP

Application

  Digital cable set-top boxes
  Digital calbe tuners
  Cable modems

 

 


For detailed information about the products, please contact Montage Sales.

Tel: +86 21 51696833
Email: sales@montage-tech.com

 


COPYRIGHT © 2006 MONTAGE TECHNOLOGY ALL RIGHTS RESERVED