M88MB3000 (DDR3 AMB)

Product Description

M88MB3000 is a JEDEC-compliant Advanced Memory Buffer (AMB) with data rates up to 800MT/s for FBDIMM (Fully Buffered DIMM) applications. The AMB serves as the central component of the FBDIMM, which employs high-speed, serial, point-to-point interfaces to communicate with the Memory controller and other FBDIMMs. It enables DDR2 memory solutions with lower power consumption and higher speeds for applications such as servers and workstations.

M88MB3000

Feature

  • Compliant with JEDEC specifications
  • 3.2, 4.0 or 4.8 Gbps FBD channel bit rate
  • Speed up to DDR2-800
  • Quad rank support
  • Dual DDR2 I/O voltage support (1.8 V / 1.55 V)
  • Support the following features/modes
    • All fail-over modes
    • Repeater mode
    • Recalibrate state
    • Voltage margin test
  • Support the following optional features
    • 12-lane northbound non-ECC
    • L0s low power state
    • Data mask
    • Variable read latency
    • Timing margin test
  • Include the following Design for Test features
    • MemBIST engine for DIMM defects detecting
    • IBIST engine for interconnect testing at DIMM or system level
    • Transparent mode for DRAM testing
  • FBD configuration register set supported
  • Green package: 655-pin FCBGA (Flip-Chip)
  • Power supply: 1.5 V, 1.8 V and 3.3 V
  • Low power consumption (< 3.5 W in active mode)

Application

  • Servers
  • Workstations
  • Networking equipment
  • Storage systems
  • High-end desktop computers